Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Honda Tsivik
+ Cars of the mark of It Treats Full text and Honda Civic With care
+ Maintenance education
+ Regular maintenance
+ Motor
+ Cooling of system and heating
+ System of provision of power and launch
+ Electric motor equipment
+ Systems of control of the motor
- Box of dislocation of gear
   - Manual box organized 5 of dislocation of gear
      General information
      Substitution of epiploons of power ends
      Check of a state and substitution of a support of the transmission
      Removal and installation of sketch of the walk of dislocation of gear
      Check and substitution of the switch of sensor of fires of a support
      Removal and installation RKPP
      Repairs of capital of RKPP - the general information
   + Automatic exchanges organized 4 and stepless (ат and CVT)
+ Union and ends of power
+ Brakes system
+ Support of the triangular form of interruption and direction
+ Body
+ Electric side equipment

Removal and installation RKPP

ORDER OF REALIZATION

1. Desconecte a negative wire of the battery.

If the stereosystem established in the car if it equips of a security code before desconectar the battery they secure what has the correct combination of the entry of the system sound in the action!

2. Withdraw the ressonador, a sleeve of an air entry and a covering of the purifier of air (to see the Head of the system of provision of Power and launch).
3. Desconecte an electrical system of an author and there results the superior pin of the fixation of the last one (to see the Chief Elektrooborudovaniye of the motor).

4. Desconecte the tire of the base of RKPP, an electrical system of the switch of sensor of fires of a support (to see the Check and the substitution of the switch of sensor of fires of a support) and the speed sensor (companion to see an illustration).

5. Weaken nuts stupichny of the fixation of ends of power (to see the Chief Stsepleniye and ends of power). Weaken nuts of the fixation of advanced wheels. The car also establishes it the Poddomkratta in stakes. Withdraw advanced wheels.
6. In the corresponding complete set they withdraw the protection of a case.
7. Withdraw the doubled section of the system of the launch that passes below the transmission (to see the Head of the system of provision of Power and launch).
8. The oil of gear box of fusion (to see the Front Regular maintenance).
9. Desconecte of the sketch of transmission of the walk of the commutation and a bar of jet of the lever of the dislocation of gear (to see the Removal and the installation of the sketch of the walk of the dislocation of gear).
10. Withdraw the knot of nipple of the connection of a hydraulic hose of the walk of the union with the front hydraulic line of the pressure. Withdraw the line of head of pressure and the executive cylinder of the union with a stick of empurrador (to see the Chief Stsepleniye and ends of power).

Try not to bend and not to overroll up the line of head of pressure. An union pedal does not insist out on the retired executive cylinder.

11. Withdraw ends of power (to see the Chief Stsepleniye and ends of power).

12. In the corresponding complete set they withdraw a rib that is secured of the unity of power (companion sees an illustration).

13. Result fixation pins and an union dome discovers the access.
14. Give a pin of the fixation of the distributor of the ignition. Adhere to slingshots elevation to a head of cylinders and spread the motor out in cranks, having weakened the load of the support of transmission.
15. In the corresponding complete set they withdraw the fabric of antispray.
16. There supports the transmission a monkey (whenever possible special offer), having fixed it in a head of the last one for a chain of security.

The special transmission mouths in a head of a monkey of floor are given out. Lift the transmission, having unloaded finally his support.

17. Give nuts and pins of the fixation of the right support RKPP (companion sees an illustration).

18. Result four superior pins of the fixation of the transmission to the motor (companion sees an illustration).

19. Give pins of arms of the fixation of lines of a hydraulic way of the walk of the union (companion sees an illustration).

20. The lowest thing results behind the pin of the fixation of the transmission to the motor located straightly on the end of right power.

21. There results the lowest pin of the fixation of the transmission to the motor, and also support pins of arm (companion sees an illustration).

22. Finally make sure, of a lack of interest of all the lines and an electrical system, then, moving a monkey, carefully separate RKPP of the motor.
23. Having launched completely the end main RKPP of the meeting of union, take a box of bass of the car.
24. After the removal of an access to box component of union opens it, what affirm, taking an opportunity the saza must happen. Normally in the moment of the removal of RKPP it is accepted to do the substitution of union (to see the Chief Stsepleniye and ends of power).

Installation

ORDER OF REALIZATION

1. If withdrawn, it installs in component of place of the union (to see the Chief Stsepleniye and ends of power).
2. One secures available at the places of two guides of pins. The embarrassment transmission in a monkey as the fez in the course of is demolished, and carefully it acquires it below the car, having stood up in the regular situation. Exactly between in a main end in the gear with openings of a nave of the driven plate of pressure. Do not apply force in absolute, – if the main end does not enter in a nave, to adjust an angle of canvas of the transmission and lightly to become an end, trying to obtain the correct combination of shlits.
3. Pins of screw of fixation of RKPP to the motor, and also pins of a rear arm. Hold tight the fixation with the necessary effort.
4. Screw three superior pins of the fixation of a box to the motor, and also the lowest pin of the fixation of an author. Hold tight the fixation with the necessary effort.
5. Lightly lift the transmission in a monkey, establish a pin and the nuts of the fixation of an arm of the right support of the meeting. Hold tight the fixation with the necessary effort.
6. Establish an advanced arm of lock and hold tight pins of his fixation with the necessary effort.
7. In the corresponding complete set they install the fabric of antispray. Hold tight the fixation with the necessary effort.
8. Desconecte a rope of elevation and screw at the place a pin of the fixation of the distributor.
9. Establish a covering of an opening of observation of a dome of the union. In the corresponding complete set they establish ribs are secured of the unity of power. Hold tight the fixation with the necessary effort.
10. The new installation is done as it must be, the return to an order to be demolished.
11. Fill out in the transmission the necessary amount of oil of gear box of the necessary degree (to see the Front Regular maintenance).
12. Pump on the hydraulic system of the walk of the union
13. Do races of proof of the car, checking the usefulness of the functioning of RKPP. Examine the unity of power in the existence of signs of the hole of liquids.