Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Support of the triangular form of interruption and direction

General information

Dispatch the support of the triangular form of completely independent interruption for the top and the lowest, absorbent levers of the shock with springs of screw and the stabilizer of the angry stability (to see illustrations I lower).

In a rear support of the triangular form of interruption independent the longitudinal levers, the top and the lowest levers and the meetings of absorbent ones of the shock with springs of screw are in use (to see illustrations I lower).

All the models are ended with the mechanism of direction of torture. In some models the hydraulic fortification of a wheel is supplied. In the system of the hydrofortification of a wheel (STRAIGHT OF PRECEDENCE) the bomb of direction given to the rotation of the motor joined a case of the mechanism of torture through flexible hydraulic hoses is in use.

Very often in the course of the service of component ones of a support of the triangular form of interruption it is necessary to be in front of the resistant fixation to an otdavaniye. For Prikipaniye of elements of the fixation one adheres with the fact that it is constantly subject to extern influences, they are in the contact with water, dirt, a soot and other substances that promote development of corrosion. For aims of the simplification of the proceeding of an otdavaniye of such a his "pricked" fixation it is necessary to become pregnant for the abundant amount of the oil of attainment previously. The cleaning of open parts of woodcarving of the fixation a rigid wire brush also promotes the simplification of an otdavaniye of the rusty nuts. Sometimes, in specially difficult cases, for the otpuskaniye that "pricked" pins / nuts it is possible to use a current. The remains of current against the region an opening of a nut / head of a pin and sharp punches with the hammer beat in his opposite end. Look what the current did not crack, try a woodcarving does not damage inaccurate punches. The quite efficient way also heats up of the fixation that does not give in to an otdavaniye and a torch of the hand blowpipe or a torch of gas that goes round it component surfaces though the authors of this manual also do not recommend to resort without extreme necessity to such a technology in view of his potential danger joined with a possibility of the ignition and risk of receiving burns. The different extensive collars and the mouths of tube in them are destined for the increase in the torque in an otpuskaniye of the fixation, nevertheless it remembers that it is not necessary to use such complete devices of intensification of the equipped walk of "graggers" – the risk of the failure of the mechanism of catraca is too loudly. Sometimes the nut / pin begins to hand after previously lightly it pinches in the direction of the movement of the pointers of the clock. The whole fixation that otpuskaniye demanded the application of extraordinary measures in the meeting is subject to the substitution!

After an otdavaniye attentively they check a condition of the fixation and in case of the necessity it does his substitution with elements of the same so great standard. In the meeting they hold tight the fixation of component ones of a support of the triangular form of interruption and his direction is strict with the necessary effort.

Do not do attempts of a rikhtovka of the component deformed ones of a support of the triangular form of interruption and driving in absolute – they substitute incorrect parts!

The proceedings of the service of component ones of a support of the triangular form of interruption are executed below the car, it is necessary to think in advance of opportunities for lifting the vehicle and his fixation in the lifted situation (prepare a monkey fiável and you stop short).

Do not execute any work below the car, the lifted situation fixed in only through a monkey in absolute!

Component of an advanced support of the triangular form of interruption


1 - the Direction mechanism 2 - the Collar of the capture of the lowest lever of control 3 - Nizhny Novgorod a control lever	4 - the fork that Is Loosened 5 - the Rotary fist 6 - Meeting of the absorbent one of the shock with a spring of screw

Component of a rear support of the triangular form of interruption


1 - Meeting of the absorbent one of the shock with a spring of screw 2 - the Superior lever 3 - Nizhny Novgorod to lever	4 - the Compensation lever 5 - the Longitudinal lever