Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Lamps substitution

Dispatch rates of turns / fires are installed and marker lights

Civic models

ORDER OF REALIZATION

1. For the substitution of the left lamp (from the driver) in the motor begun they turn you go round against the stop on the right, soon they put the ignition out. The right lamp is modified in the wheels that are poured on the left.
2. Launch an armband and withdraw a drawer with lock of the arch of corresponding wheel.
3. Become a cartridge of lamp in 1/4 turns in reverse sense to the movement of the pointers of the clock and take it of a covering of the meeting of a lamp. Hold tight a lamp in a cartridge, turn it in 1/8 turns in reverse sense to the movement of the pointers of the clock, soon pull on the outside and launch of the meeting of cartridge. The installation is done upside-down.

It integrates

ORDER OF REALIZATION

1st. Give screws of fixation and take the meeting of a lamp of the list of wing of the car (companions see illustrations).

1b. Become a cartridge in 1/8 turns in reverse sense to the movement of the pointers of the clock and take it of a covering of the meeting of lantern.

2. Take a lamp of the chief.
3. The installation is done upside-down.

Subsequent lights of marker and lights of the brake

ORDER OF REALIZATION

1. There opens a covering a haulage company / door of baggage of a few back and withdraw a decorative covering of the corresponding rear lamp.

2nd. Become a cartridge of lamp in reverse sense to the movement of the pointers of the clock and take it of a covering of the meeting of lantern (companions see illustrations).

2b. An agreement of lamps of the back combined the lamp in the models of Full text (the decorative covering is withdrawn).

3. Hold tight a lamp in a cartridge, turn in reverse sense to the movement of the pointers of the clock and take on the outside.
4. The installation is done upside-down.

Lights of the brake of the high level

Civic

ORDER OF REALIZATION

1. Withdraw decorative coverings (if two fixation screws are supplied), give the last thing and withdraw the meeting of a light of the brake of the high level of the list of body.
2. Become a cartridge in reverse sense to the movement of the pointers of the clock and take it of a covering of the meeting of lantern. Having pulled, take a lamp.
3. The installation is done upside-down.

It integrates

ORDER OF REALIZATION

1. Open a haulage company of baggage, having supplied through that the access to a light of the brake of the high level (companion seeing an illustration).

2. Become a cartridge of lamp in reverse sense to the movement of the pointers of the clock and launch it of the lantern meeting.
3. Having pulled on the outside, take a lamp of the chief.
4. The installation is done upside-down.

Devices lighting

ORDER OF REALIZATION

1. Withdraw a combination of devices (to see the Removal and the installation of a combination of devices).

2. Become a cartridge of lamp in reverse sense to the movement of the pointers of the clock of the meeting of a combination of devices (companion sees an illustration).

3. Having pulled on the outside, take a lamp of the chief.
4. The installation is done upside-down.

Lighting of plate of register

ORDER OF REALIZATION

1. Result two fixation screws and withdraw a lens of a lamp of the lighting of the plate of register.

2. Become a cartridge lapovy in reverse sense to the movement of the pointers of the clock and take it of the meeting of lantern (companion sees an illustration).

3. Having pulled on the outside, launch a lamp of the chief.
4. The installation is done upside-down.

Internal lamps (hall, baggage compartment)

ORDER OF REALIZATION

1. Having hooked exactly the screwdriver up, withdraw a lens of the corresponding lamp.

2. Launch a lamp of spring captures. If there is a need for a lamp poddevaniye, the lever begins only below edges of punches of a lamp to avoid the damage of a bottle.
3. The installation is done upside-down.