Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Removal and installation of automatic exchanges organized 4 and stepless (in and CVT)

Removal

ORDER OF REALIZATION

1. Desconecte a negative wire of the battery. If the stereosystem established in the car if it equips of a security code before desconectar the battery they secure what has the correct combination of the entry of the system sound in the action! 2. Withdraw the ressonador, a sleeve of an air entry and a covering of the purifier of air (to see the Head of the system of provision of Power and launch). 3. Withdraw of an author an electrical system and an arm of his fixation (to see the Chief Elektrooborudovaniye of the motor). 4. Desconecte the tire of his base of the transmission. 5. Disunite the capture of the valve eletromagnética of the management of blockading (to see the Check and the substitution of valves eletromagnéticas of the blockade management). 6. Desconecte an electrical system of VSS (a manual box sees the Part organized 5 of the dislocation of gear of the present Chapter) 7. Result three superior pins of the fixation of the transmission to the motor (companion sees an illustration), and also a pin of a rear support of the unity of power. 8. The car also establishes it the Poddomkratta in stakes. 9. Fusion of transmission ATF. during the installation to the place of a drain they do not forget a cork of substituting in him a lavador of fighter. 10. Desconecte the lowest levers of a support of the triangular form of interruption of rotary fists (to see the Chief Podvesk and driving). 11. The ends of power of launch of the meeting of the main transfer (to see the Chief Stsepleniye and ends of power). The meetings of coat of internal HP JOIN US in plastic bags of the protection of the pollution. 12. Withdraw a fork of the right damper (to see the Chief Podvesk and driving). 13. Withdraw ends of power (to see the Chief Stsepleniye and ends of power). 14. Withdraw the protection of a case. 15. Withdraw the doubled section of the system of the launch that passes below the unity of power (to see the Head of the system of provision of Power and launch). 16. Discover the knot that enters in dock of a thread of driving of the dislocation of gear, soon withdraw a lever of control and a thread of driving (a thread of the lever is not need of desconectar). 17. Withdraw a support of lock (a manual box sees the Part organized 5 of the dislocation of gear of the present Chapter). 18. Desconecte a thread of TV of a lever of control to provision of a valve of butterfly (to see the Check and the agreement of a thread of the management of a valve of butterfly in the kick way I lower (thread of TV) - the models of Full text). 19. Desconecte hoses of a way that cools of ATF of metal lines. To avoid what a liquid effluence develops it waters the ends confided in hose to his zakuporta and at the same time. 20. Withdraw an edge (a) of the inflexibility of the unity of power (companion sees an illustration). 21. Discover the access to a rotation convertedor to one IN / PENDULUM (CVT). 22. The position of mark of the convertedor of the rotation of one IN / PENDULUM (CVT) of the disc that drives enough (companion sees an illustration) – in component of meeting has of be installing strictly in ancient provisions. 23. In series turn pins of the fixation of the convertedor of a rotation / pendulum to a driving disc. To secure the access to the next pin there become an end of inclination of a pulley. 24. There results a pin of the fixation of the distributor of the ignition and an elevation rope adheres to the motor. 25. There supports the transmission a monkey (whenever possible special offer), having fixed it in a head of the last one for a chain of security. Lift the transmission, having unloaded his support. 26. Withdraw a support of side (companion sees an illustration). 27. There results the lowest pin of the fixation of the transmission to the motor, and also the pins of the rear support of the unity of power (companion sees an illustration). 28. Take a monkey behind, withdrawing the transmission of the pins of direction. The trace that the convertedor of the rotation if desconectou of a driving disc. I embarrass the convertedor in the transmission not to allow his loss in the course of the meeting it is demolished. The lowest transmission and it takes it of bass of the car. Possibly, it will have to lower lightly a monkey / to carve with water-fort the crank, the motor of support in the course of the lowland of the transmission for aims of the launch of the space of bigger work.

Installation

ORDER OF REALIZATION

1. The manufacturers of cars (company of Honda) recommend to do the washing of a fridge of ATF and the lines of the way that cools with the solvent. The trace that after the realization of washing the solvent did not remain in more fresh lines / cavities. It will be reasonable to wash out in the conclusion of a guarantee a fridge of pure ATF. 2. Establish at the place an author (to see the Chief Elektrooborudovaniye of the motor). 3. Before confidence of trace of installation of gear of a nave of the convertedor of rotation in the bomb. Having fixed the transmission in a monkey, bring it to the regular situation (try not to tilt the meeting to avoid his loss of the convertedor). 4. Carry out the correct combination of the etiquettes of the position of the convertedor of the disc that drives put enough in the course of they are demolished. 5. Make sure of the presence in the nests of the pins of direction, then exactly transmission puts them, looking at the fairness of the entry of the convertedor in the gear. 6. Screw the lowest pin of the fixation of the transmission to the motor and the lowest pin of the fixation of the motor to the transmission. Hold tight pins with the necessary effort. Do not use pins to pull from the transmission to the motor. If it is not possible to hold tight the meeting, try to establish the reason and to remove a hindrance. 7. The new installation is done as it must be, the return to an order to be demolished. 8. There fills out in the transmission the necessary number of ATF of the necessary degree (to see the Front Regular maintenance). Do not be frightened it is necessary to fill out liquids lightly more, of what it is stipulated by standards, – the excess will leave in the stuffing of the convertedor of the rotation that is not devastated in the course of the usual modification of ATF. 9. The motor begins, lift the parking they curb and three times execute the selector's lever through all the provisions. One secures of the usefulness of the functioning of a thread of driving of the dislocation of gear (to see the Substitution and the agreement of a thread of the dislocation of gear). 10. Check that the installation of a corner of an advancement of the ignition, in case of the necessity they do the corresponding agreement (to see the Front Regular maintenance). 11. Heat the motor up to the temperature of normal work (transmission in the situation "N" or "P"), soon deaden it and check the level ATF. 12. Execute races of proof of the car, soon check the unity of power to existence of signs of the hole of liquids.