Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Removal, check of a state and installation of component ones of meeting of union

Removal

ORDER OF REALIZATION

1. For aims of securing the access to the union meeting normally they withdraw the transmission, leaving the motor in the car. If the motor is already withdrawn for the realization of the general repairs or repairs of capital, the condition of component ones of the union has to happen without fail. To mean the quite small price of details and quite great volume of the work in metal works in the access asseguração to the union meeting, does sense to do the substitution of the last one in spite of a condition of component ones. The description of the proceeding of the removal of the union without the extraction of the motor of the car happens down. 2. Withdraw a box of dislocation of gear (there sees a manual box organized 5 of the dislocation of gear). A monkey supports the motor or spread it out from above in the crank (the last thing is preferable). In case of the use of a monkey they do not forget of putting between his head and the trundle bed of a case to wooden grindstone for aims of the distribution of the load. Maslozabornik of the bomb of oil settles down very much near to the bottom of the trundle bed of a case and can be damaged easily in the moment of the deformation of the last one. 3. The fork of the extinguishment of the union and the load of launch can be left at the place in a case of transmission. 4. In order that the special instrument of the union avoids the loss of the disc driven in the moment of the removal of a basket, pass in all the parts of his nave to center. 5. Attentively examine surfaces of a pendulum and meeting of a basket of the union in the marking of existence (normally in the form of the letters of X or O put with the white painting). If it will not be possible to find the marking, to put it independently, having marked inequivocamente the provision of a basket about a pendulum (companion seeing an illustration). 6. I work in a diagonal order, in stages exactly weaken pins of the fixation of a basket of the union to a pendulum (companion sees an illustration), having unloaded completely one spring. Union meeting that it supports confiantemente, finally turns out to be pins, soon separate a basket of a pendulum and withdraw the whole meeting of the car.

To check

ORDER OF REALIZATION

1. Very often the violation of the usefulness of the functioning of the union is joined with the use of bedcovers of friction of the driven disc. However, there are necessary the component ones of the meeting study a condition of all attentively. 2. Study a surface of work of a pendulum in existence of slits, aspects of overheating, furrows and other damages. The insignificant defects can be removed by an in favor point in the conditions of a workshop of the service of the car (the in favor point is recommended being done in spite of a condition of a surface). The description of proceedings of removal and installation of a pendulum supplies with itself the section seized the Chief Dvigatel. 3. Degree of estimate of use of bedcovers of friction of the driven plate of pressure. The mistakes surface has to the tower on rivets leaders at least in 1,6 mm. Make sure of the density of the landing of all the rivets, check the springs of twist / dampers of existence of slits, aspects of the deformation and other mechanical damages (companion sees an illustration). I eat already if above it mentioned, the substitution of component ones of the union is reasonable to make every time in the moment of his removal paying, therefore, attention to the most light mistakes. 4. Together with the disc always driven if it substitutes also the load of launch (to see the Removal, the check of a state and the installation of the load of launch and a fork of the extinguishment of the union). Taking an opportunity, at the same time check a condition of the load of direction in a pin of an end of inclination (to see the Check of a state and the substitution of the load of direction). 5th. Appreciate a condition of the prosecuted surfaces and spring petals of diaphragm of a disc of press (companions see illustrations). 5b. Check a surface of friction to damages existence. In the moment of the detection of defects they substitute the meeting of a basket. The aspects of the easy polishing can be withdrawn through a paper of emery of fine granulation. In centers of services of company of the company of Honda it is always possible to acquire the meeting restored in an exchange base.

Installation

ORDER OF REALIZATION

1. Before the installation they rub the surfaces of a pendulum and a disc of press that were exposed to the mechanical work with the rags moistened in the acetone. It is extremely important to carry out full desengraxar of surfaces of work of component ones, as well as the bedcovers of friction of the driven disc. The touch component ones with only purely did the dish hands. 2. Hold tight the meeting of a basket with the instrument enclosed in him and fixed to center of component ones for the disc led to a pendulum. Follow that the trace of that pressure the plates were developed to a pendulum marked with the corresponding marking ("type" of side of pendulum) by the parties. If the marking if it is going away, remembers that the driven disc has to establish for the springs of twist / dampers to the transmission. 3. To the hand hold tight pins of the fixation of the meeting to a pendulum. 4. Make centering of component ones of the meeting of the union. The special instrument goes on for a nave of the driven disc and refuels in a pocket in a face of end of a pin of an end of inclination (companion sees an illustration). Since the alignment of component ones moves the instrument in different directions in the vertical airplane. Moving for a diagonal order, in stages hold tight densely pins of fixation of meeting, soon one seizes them with the necessary effort. Take the instrument of the union to center. 5. The heat-resistant lubricant fills an internal flute of the load of launch (to see the Removal, the check of a state and the installation of the load of launch and a fork of the extinguishment of the union). Also there polishes the surfaces of contact of the lever of the extinguishment of the union and the bearer of the load of a main end of the transmission. 6. Install at the place the load of launch (to see the Check of a state and the substitution of the load of direction). 7. There install the transmission and all the component ones that were withdrawn for aims of securing the access.