Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Removal and installation of the distributor of ignition

Removal

ORDER OF REALIZATION

1. Desconecte a negative wire of the battery. If the stereosystem established in the car if it equips of a security code before desconectar the battery they secure what has the correct combination of the entry of the system sound in the action! 2. The wires of mark and the hoses and desconectam an electrical system and hoses of the distributor. 3. There finds in a distributor's covering the convex etiquette (in the form of the number or a letter) specification of the position of the capture VV of a wire of a capture of spark of the first cylinder. If the covering is not equipped of the marking of this type, find the capture, having passed him to a wire of a candle of the first cylinder, and abolish the corresponding etiquette independently. 4. Discover the distributor (to see the Front Regular maintenance) and becomes an end of inclination so that the corridor unfolded for a nose towards an agreement of the capture of a wire of candle of the first cylinder (to see the Repair of the motor without extraction of the car - Civic models or Repair of the motor without extraction of the car - the Full text model). 5th. Show up in the edge of the case of the distributor, straightly in front of a nose of parallel corridor to an axle of a last one, an etiquette of direction (if the corridor has several noses, select central office). The mark also when there is placing the provision of the base of the distributor the motor (companions seeing illustrations). Pins of fixation of the distributor in the models of Civivc. 5b. Pins of fixation of the distributor in the Full text models. 6. Give the pressure of a pin (pins) and take the distributor of the motor, having pulled it strictly vertically. To avoid when the null efforts were given in the drawing of etiquettes of agreement, do not allow a provorachivaniye of an end of inclination after the extraction of the distributor of the ignition of the motor!

Installation

If the provorachivaniye of an end of inclination in the distributor of ignition been overcome with the motor if it allowed, is necessary to bring the motor in the provision of VMT of the first cylinder (to see. The Section appropriated in the Repair of the motor without extraction of the car - Civic models or Repair of the motor without extraction of the car - the Full text model and during the installation of the distributor to carry out the relevant provision of his corridor.

ORDER OF REALIZATION

1. The distributor's case puts a new ring of fighter. 2. Exactly fill the distributor in a reception nest in a head of cylinders. Carry out the combination of the etiquettes of landing put in the course of they are demolished. The edges in a face of end of an end of the distributor and reciprocal grooves in a face of end of the axle have an asymmetrical agreement that brings to nothing a possibility of the installation of the distributor with a turn in 180 °. 3. If there is not possible the distributor will put completely, first of all make sure of the fairness of the combination of placing etiquettes, then the corridor carries out this it unfolded for a nose precisely towards an etiquette in the edge of the case. 4. Freely I screw what holds tight a pin (pins). 5. It makes the new meeting as debit be, the return to an order to be demolished. Check the installation of a corner of an advancement of the ignition, then strongly there insists the pressure of a pin of the fixation of the distributor on the motor.