Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Repair of the motor without extraction of the car – the Full text model

General information

This Part of the Chief Dvigatel is dedicated to the repair of the motor of gasoline of 4 cylinders of 1.8 l equipped of the system of the injection of the fuel that is not joined with the extraction of the car (in situ). The whole proceedings demand is demolished of the unity of power there are supplied in the Part the General repairs and the repairs of capital of the motor of the present Chapter.

Three motors versions are applied to a complete set of the models of considered Acura Integra. All the versions are between motors with two axles of the superior agreement (DOHC). Approximately 4 valves (16V) are the action of each one of cylinders.

The motors are ended with one of two versions of the electronic system of the correction of phases of the distribution of gas (VTEC). To the most detailed description of a drawing and the beginning of the functioning of the systems VTEC one dedicates the Systems VTEC - the general information and the check of a condition of component ones.

The worn-out motors have the next designations:

B18B1	1.8 l, 16V, DOHC
B18C1	1.8 l, 16V, DOHC VTEC
B18C5	1.8 l, 16V, DOHC VTEC

The description of most of part of the respected proceedings does to itself on basis of the supposition that the unity of power remains at the regular place in a compartment of reason of the car. In view of the saying in case of which the motor is already demolished and is installed in a bank or the bookcase of meeting, a great deal of the described steps have to be lowered.

The motor has a drawing compact that component principal is the block of manufactured cylinders of the league from light aluminum. The sleeves from steel of cylinders are inserted in the openings perforated in the block. From above in the block the head from aluminum of cylinders is established. The inclination end is put in an integrant bed with the replaceable insertions of radical loads they install in him. The fourth load is equipped of the separate persistent insertions that limit a play of axial side of an end.

Two equip the pistons compression and a scraper of oil with rings. The piston fingers semifloating landing that has corset themselves in the superior sticks leaders. In the lowest heads the replaceable loads insertions conrod are located.

The motor has the liquid cooling on basis of the bomb of centrifugal water of rotor installed action of a belt that distributes the gas. The liquid cooling circulates in internal galleries of the motor, washing cylinders and cameras of combustion, and also it is banished in the channels equipped in the oil pipeline of entry.

The provision of the lubricant component internal of the motor is executed by the bomb of oil of gear located in an advanced part of the motor below a covering of a belt that distributes the gas. The walk of the bomb is executed straightly of an inclination end. Road sips the oil the filter of net of the trundle bed of case, soon there banished road the filter of complete line of the type of cartridge installed in the side of the unity of power turned to a rear splitting of a compartment of reason.