Before the initial implementation of the proceeding, hope for the cooling full of the motor.
ORDER OF REALIZATION
1. In some Full text models between a filter of oil of complete line and the block of the motor to oil fridge it is installed (companion sees an illustration).
2. Withdraw a filter of oil and it establishes the oil of reason (to see the Front Regular maintenance). 3. Desconecte two lines of a way that cools of the oil fridge. Be prepared to join the spilled liquid. At the same time to a few open ends zakuporta of lines and connections of nipple. 4. Give the great nut (that represents normally a part of a hollow pin of fixation) in the center of the fridge of oil and separate the last of the motor. 5. The installation is done upside-down. Do not forget of substituting the ring of fighter established between the block and the fridge of oil (before installation oil a new ring pure reason). Confidence of trace of fixation of hoses of lines is cooled by them in the unions. 6. Establish a new filter of oil and fill out in the oil of fresh motor of motor (to see the Front Regular maintenance). 7. According to the necessity correct levels of cooling the oil of reason and the liquid. 8. The motor begins and it is checked by the existence of signs of the hole of oil or liquid that cools. 9. Levels of reexamination of oil and liquid that cools.
