Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Check of usefulness of functioning and substitution of the thermostat

To check

ORDER OF REALIZATION

1. Before being approved finally in a thermostat exit out of the operation, check the level of cooling the liquid in system, a state and effort of a tension of a belt of driving (to see the Front Regular maintenance), and also the usefulness of the functioning of the instrument of measuring of the temperature. 2. One of possible ones the reason of also reduces the heating of the motor (according to the indications of the interference of instrument of measuring of the thermostat in the open situation it is. Substitute the new thermostat. 3. In case of overheating of the motor they touch the best hose of an electric heater. If the thermostat does not heat the hose, possibly, it corsets itself in a shut position, blockading the circulation of cooling the liquid for an electric heater. Substitute the thermostat. Do not make working the car with the thermostat withdrawn in absolute! At the same time the feedback of the processor of side can be broken what will drive to increase in the toxicity of the carried out gases and I increase in the fuel consumption. 4. If the best hose is heated, it means that the liquid cooling circulates through an electric heater, this is the thermostat it is opened. Direct the Diagnostic one of materials of Bad functioning of Knots and Systems of the Car.

Substitution

ORDER OF REALIZATION

1. Desconecte a negative wire of the battery. If the stereosystem established in the car if it equips of a security code before desconectar the battery they secure what has the correct combination of the entry of the system sound in the action! 2. The liquid of cooling of fusion of an electric heater (to see the Front Regular maintenance). If the substitution of the mixture was done recently, guard it for the new use. 3. Walk in the hose of the best electric heater to the motor and find a covering of covering of thermostat. 4. Weaken a collar and withdraw a hose of the tube of branch that is joined. If the "pricked" hose, it seizes it with claws (as it is possible more near to the end) and try to revolve in a branch tube for aims of the destruction of the layer of property. the old man, subject to the hose of substitution only can be cut (try not to scratch a tube of branch). 5. If the surface of a tube of branch is contacted by it to a hose if it slams with the corrosion, or mechanically it will be damaged, it does sense to substitute a covering of covering of thermostat. 6th. Disunite to electric capture of the sensor of the temperature of cooling the liquid of the motor (EST), results fixation pins and discover a covering of the thermostat (Honda Cívico). If the "pricked" covering, he explores the hammer with the gentle living creature. Prepare to join the spilled liquid. 6b. The pins agreement of fixing (It treats Full text with care). 7. Try to remember of adjusting the position of the thermostat (a finger), soon take it of a covering. 8. Substitute the placing of fighter of rubber of the thermostat (companion sees an illustration). 9. Install the thermostat in a covering (do not apply any selante). The trace that was developed by a finger and the party provided with one spring to the motor (companion saw an illustration). 10. Establish at the place a covering and fix it for pins, having held tight the last thing with the necessary effort. 11. One a hose to a tube of branch of covering and strongly fix it for a collar. Return at the place all the component ones that were withdrawn for aims of securing the access. 12. Fill out in the system the necessary amount of cooling the liquid (to see the Front Regular maintenance). 13. The motor begins and it is checked by the existence of holes and the usefulness of the functioning of the thermostat (to see paragraphs with 2 in 4).