Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Removal, check of a state and installation of the bomb of oil

Removal

ORDER OF REALIZATION

1. There takes away a belt of GRM drive (to see Removal, checks of a state and installation of a belt that distributes the gas and cog-wheels of GRM drive). 2. Withdraw the trundle bed of case of motor (to see the Removal and the installation of the trundle bed of a case of the motor). 3. Desconecte to meeting of a maslozabornik with a grill and a tube of the bridge of coverings of radical loads and an accommodation of bomb (companion sees an illustration). 4. Result fixation pins and withdraw the bomb of oil of the motor (companion sees an illustration). 5. Result fixation screws and discover with the bomb (companion sees an illustration). Not to break an opening in leaders of fixation of screws it is better to do his relief through an impact driver.

To check

ORDER OF REALIZATION

1st. Measure an axial slit of wheels of gear of the bomb (companions see illustrations). 1b. Measure a slit between tops of teeths of gear wheels. 1c. Measure a slit between a wheel of extern gear and the case. Compare when they resulted from measurements to Specifications demands. If the slits size exceeds admissible values, substitute the bomb. 2. There results a cork of the valve that it reduces and take of a nest in a bomb accommodation one spring and a diver of the valve. Check one spring to deformations existence and a diver – for the scratches existence and zadir. The component incorrect ones are subject to the substitution. 3. Establish wheels of gear in a bomb accommodation and fill cavities between the technical vaseline teeths. 4. Screws of fat of fixation of a covering of the bomb with the antiseizure selante. Establish a covering, screw screws and hold tight them with the necessary effort. Establish one spring and a diver of the valve that it reduces in a bomb accommodation. Having substituted a lavador of fighter, screw a cork and strongly hold tight it.

Installation

ORDER OF REALIZATION

1. Lightly the fat with the selante anaeróbico to surface of an inter-connected accommodation of bomb to the block and the new fighter ring is enclosed in a flute in the case. Install the bomb in the block and with the necessary effort they hold tight pins of fixation. 2. Establish in the meeting of place of a maslozabornik, having held tight pins they fix with the necessary effort (do not forget of substituting the placing of fighter). 3. Install the trundle bed of case (to see the Removal and the installation of the trundle bed of a case of the motor). 4. The new installation is done as it must be, the return to an order to be demolished. In the conclusion they do not forget of filling out the oil of motor in the motor and filling the system of cooling (to see the Front Regular maintenance). 5. The motor begins and it is checked by the existence of signs of holes.