Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Removal and installation of a pendulum / driving of disc

Removal

ORDER OF REALIZATION

1. The car also establishes it the Poddomkratta in stakes. Withdraw the transmission (to see the Chief Korobk of the dislocation of gear). 2. In models they withdraw the meeting of union of RKPP (to see the Chief Stsepleniye and ends of power). At the same time check a condition of component ones of the union and the load of direction. 3. There results pins of the fixation of a pendulum / a disc of driving to an end of inclination (companion sees an illustration). If in the course of the pins weakening it will begin the end be turning, removing an author (to see the Chief Elektrooborudovaniye of the motor) and holds tight the screwdriver between teeths of a garland of a pendulum (RKPP) or passes a long current during one of openings of a driving disc, having rested it against an edge in the block (in). 4. Withdraw a pendulum / a disc of driving of an end of inclination. The pendulum / a driving disc is the quite heavy component thing – it will be reasonable to resort to the help of a spectator. 5. Carefully rub a pendulum, having withdrawn completely of him aspects of oil and lubricant. Check a surface of work of a pendulum of the existence of slits, the furrows stopped leaders of rivets of a plate of pressure of friction, aspects overheating and zadir. The least defects can be removed through a paper of emery of fine granulation. Check a garland of gear to existence of slits and chips of teeths. a pendulum puts itself in a flat surface for aims of the evaluation of his planeness (use the planeness to measure of instrument). 6. Rub the inter-connected surfaces of pendulum / a disc of driving and an end of inclination. If the signs of the hole of oil along a few back epiploon of an inclination end happen, do his substitution (to see the Substitution of a few back epiploon of an inclination end).

Installation

ORDER OF REALIZATION

1. Establish a pendulum / a disc of driving in an inclination end. In some motors the direction pin is supplied, or the fixation openings locate asymmetrically what it guarantees to not ambiguity of the landing of a detail. Before rolling pins of fixation, polish on a part of woodcarving with the fixation selante. 2. Having blockaded a pendulum / a disc of driving of a provorachivaniye (3 seeing the paragraph), hold tight pins of fixation with the necessary effort in a diagonal order. 3. The new installation is done as it must be, the return to an order to be demolished.