Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Reduction of the piston of the first cylinder in the provision of the superior dead point (TDP)

Necessity of the reduction of the piston in the provision of VMT appears maintaining many proceedings, specially like removal / installation of the axle, component of GRM drive and distributor of the ignition.

ORDER OF REALIZATION

1. One secure what the transmission transfers to the neutral situation, then strongly lift the brake of parking or support behind wheels of the car you put that you were antishowing. 2. Immobilize the system of the ignition, having disunited electric captures of the distributor (to see the Chief Elektrooborudovaniye of the motor). 3. Temporarily damage a system of provision of power (to see the Head of the system of provision of Power and launch). 4. Withdraw when they were taken of spark (to see the Front Regular maintenance). 5. The reduction of some of pistons in the provision of VMT is done by a provorachivaniye of an end of inclination of the motor for one of the ways described down. It if are looked for the motor in the front (of a driving belt), the direction in reverse sense to the movement of the pointers of the clock will be the normal direction of the rotation of an end of inclination. Remember that the attempt of a provorachivaniye of an end in the direction of the movement of the pointers of the clock can lead to the violation of agreements of a belt that distributes the gas.    a) O more efficient method is the end provorachivaniye in the normal direction of the pin screwed in a face of end of a pin advanced through a key of face with the walk of catraca;    b) O use of the remote switch of an author will allow to save the time (follow manufacturers' educations). As soon as the piston seems quite shut of VMT of the end of a step of the compression, the author's stops and new agreement is executed by the method described in the point (a);    c) In the presence of the spectator, the preliminary provorachivaniye of the motor can be executed by breaks of the short enemy lines of the place of the driver below the leadership of the operator. The same beginning, when what affirmed in point (b). The settlement of account, besides, is done manually, through a key of face (to see the point e). 6. One remembers the position of the capture of the connection of a wire of candle of the first cylinder in a distributor's covering. If the capture is not marked, walk in a wire of a candle to a covering and put the corresponding etiquette independently. 7. Discover the distributor and set it aside (to see the Front Regular maintenance). 8. Mark the case in a point straightly below the capture of the first cylinder of a covering (companion sees an illustration). 9. Find etiquettes of agreement in a pulley of an end of inclination. The etiquette illuminated white it is equal to the provision of VMT. Now, becoming an end of inclination in the normal direction (5 seeing the paragraph), carry out the right combination of this etiquette with the rate in the lowest covering of a belt that distributes the gas (companion sees an illustration). 10. Now check the position of the corridor of the distributor – it will be the nose developed precisely in an etiquette in the case. If the corridor unfolds about an etiquette in 180 °, therefore, the piston of the first cylinder is in the provision of VMT of the end of a final step. 11. To bring the piston in VMT of the end of a step of the compression, it is necessary to become an end of inclination in a whole revolution (360 °) in reverse sense to the movement of the pointers of the clock. Now the corridor has to unfold for a nose to an etiquette. 12. If they all leaned above conditions on the etiquettes combination they are, the task can be considered carried out, – the piston of the first cylinder happens to the provision of VMT of the end of a step of the compression. 13. Now, this in series, like ignition to bring the pistons remained in VMT, is necessary to put the corresponding etiquettes in an edge of distributor's case (as one did higher for the capture of the connection of the first wire of candle). Provorachivaniye of an end of inclination is going to follow inevitably of the rotation of the corridor which combination of a nose with the corresponding etiquette and it will be a confirmation in the reduction of the corresponding piston in VMT of the end of a step of the compression.