Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Check of a state and substitution of the hoses located in a compartment of reason (each one 12.000 km of a race or times during 6 months)

General information

Below the influence of the high temperatures that happen in a compartment of reason of the car, the material of the hoses of rubber and it begins plastic surgeries located in him falling consequently. It is regularly necessary to examine all the hoses located below a monk's hood in existence of slits, aspects of holes, signs of hardening of the material and weakening of connections of nipple.

The information detailed on the check of a condition of hoses of systems is cooled by them of the motor and heating of the hall is affirmed in the check of a condition of component ones of the system of cooling (each one 12.000 km of a race or times during 6 months).

In order that the unions of someone are seized, but not everything, they water collars with hose they are in use. Check the confidence of the pressure of collars of hose – the weakening of his fixation leads to the holes development. If the hose puts itself in the union without collar, one secures that his end remains quite elastically for a dense compression of a surface of the union.

Vacuum hoses

ORDER OF REALIZATION

1. Normally all the hoses of vacuum that are in use specially in systems of the reduction in the toxicity of the carried out gases are marked with a code to colors, or in his walls of a few strips of color of vplavlena. In several systems several demands can be imposed to the thickness of walls of the hoses of vacuum used in them. The hoses will supply several resistance to a collapse, influences of temperature and other factors. It looks what the replaceable hoses answered in the retired parameters of the car. 2. Very often, the only quite efficient way of the check of a condition of a hose of vacuum is his removal of the car. If it is necessary to withdraw more than a hose, previously his markings take care on the right one for aims of the respect to the fairness of the connection in the meeting. 3. Estimate of a condition of a hose of vacuum, do not forget also of checking and his plastic nipple connections – examine the union in the slits existence and are secured of the density of the landing of a hose in her. In a tension in the union the hose must not lose shape unequally, causing losses of depression. 4. The short part of a hose of vacuum with an internal diameter approximately 7 mm are a stethoscope completed through which the fountains of losses of the depression somewhat easily come to the light. An end of a hose is nestled in the checked surface, the second – in an ear. The depression losses always follow whistling. When it listens component try such component furniture do not touch a reason compartment like driving of belts, blades of a krylchatka of the supporter, etc.!

Fuel hoses

In the service of component ones of a system of provision of power it is worthwhile to remember that to gasoline it is the easily flammable liquid in the highest measure. Do not smoke near to the works place and do not bring near it with the naked flame! Immediately join all the aspects of the spilled fuel, put the rags impregnated by fuel and lubricants to such a place where the probability of his chance ignition is excluded absolutely! There is always maintained near to on the hand the fire extinguisher of fire of the class B! Try not to allow blows of gasoline in open sieges from the skin – the such long contact is able to lead to the development of diseases of cancer. Remember that the way of the system of the injection of the fuel constantly is below the excessive internal pressure that it has to be deposited without fail before the work (to see the Head of the system of provision of Power and launch).

ORDER OF REALIZATION

1. Check all the hoses of fuel of rubber to existence of signs of the aging of the material and other defects. Pay the special attention to sieges of an excess and located I fight before the ends that put themselves in unions. 2. Like replaceable lines the fuel hoses only of high quality have to be in use. It is not necessary to install to the systems of provision of power of road not strengthened hoses of vacuum, transparent plastic tubes or hoses of garden in absolute. Normally to fix of fuel hoses in collars of unions of the spring type they are in use. Such collars lose the durability of the landing inside some time, besides, very often inesperadamente are set free in the moment of a lack of interest of hose. It will be reasonable more fiável substitutes such collars worm and I hold or ponder.

Metal lines

ORDER OF REALIZATION

1. The sections of metal tubes very often are in use like fuel lines. Attentively check all the rigid lines of fuel the existence of dents, excesses and other deformations. One secures of lack of slits and signs of the beginning of his education. 2. If some of sections of the metal line is subject to the substitution, use like replaceable only a tube from steel without sewing. The tubes of copper and of aluminum do not adjust for the use like substitution as they do not supply the resistance owed to the impact of vibrations of the motor. 3. Check metal tubes of brake at places of the connection they the GTTs and the limitador of valve (if this it is supplied) for existence of slits and signs of the weakening of fastenings. In case of the identification of aspects of holes it is necessary to check immediately a condition of the whole system of brakes in general.