Honda Civic/Acura Integra

from 1994 launch

Repair and operation of the car

Substitution of filter of oil of reason and filter of oil (each one 4.800 km of a race or time during three months)

The regular and quite frequent realization of the substitution of oil of reason is one of the main proceedings of the preventive maintenance of the car that is inside the qualification of the middle amateur mechanic. Consequently the reason oil is subject to the aging that is shown in his gradual fluidifying and pollution that leads to the premature use of internal component ones of the motor.

Set of tools, necessary for substitution of filter of oil of reason and filter of oil

1. Drain the capacity — it will be superficial and quite wide to minimize the probability of the spilling of oil in the land.
2. The rubber gloves — will help to protect hands of burns in the moment of the inevitable blow of oil in them during a reversion of a cork of drain of the trundle bed of a case.
3. The collar — sometimes a drain cork corsets itself somewhat only what demands the considerable effort in the moment of his reversion.
4. The head of replaceable face — is applied together with a collar or the equipped walk of a catraca in the moment of a reversion of a cork of drain, correspond to a last one for the size.
5. The strip key — allows there turns a filter of oil of complete line in the conditions of the access contented by him.
6. The key of special hat — puts in a face of end of the filter and then be able to revolve through a collar or the walk of catraca, it will answer the case of filter for the size.

ORDER OF REALIZATION

1. Prepare all the necessary and material instruments (to see an illustration in top). Also stock with enough old newspapers or rags to join the spilled oil.
2. For aims of supplying the free access to the trundle bed of a case and to an oil filter they lift the car to crank, or and establish it to his poddomkratta in stakes.

Do not execute any work below the car that only is supported below bumpers or the lifted situation kept in only like a monkey in absolute!

3. Come below the car and know an agreement of a cork of drain of the trundle bed of a case and a filter of oil. Remember that the unity of power and the component ones of the system of the production of the gases carried out during the time all of the implementation of the proceeding will remain quite hot – they think about the scheme of safe handlings with hands to avoid the chance contact with the heated surfaces.
4. Heat the motor up to the temperature of normal work – the hot oil has the biggest fluidity and better strip while washing mud and haste. Use the idle time compelled to spread all the necessary and material instruments in a convenient order. Kill the motor and discover a mouth of the gulf of oil in a covering of a head of cylinders.
5. One secures of the confidence of the fixation of the car in the lifted situation.

6. Come below the car and establish the capacity of drain below the boat trundle bed, having thought the fact that in the first moment oil will execute an opening with a decent pressure. Trying not to touch the heated surfaces of the unity of power and the component ones of the system of the production of the carried out gases, there results a cork of drain of the lowest part of the trundle bed of a case (companion sees an illustration). Depending on the oil temperature it is possible to wear gloves of rubber or to refuse them in a final stage of a reversion of a cork.

7. Allow to oil to flow I lower freely in the capacity. In the process of the weakening of a pressure of a current they move the capacity as appropriated.
8. After the oil for next of a case of motor, it rubs a cork of drain with pure rags – for him prune the small metal sawdust podlipnut that will lead immediately to the pollution of fresh oil.
9. Rub the surface of the trundle bed around a drain opening, screw a cork and strongly it is held tight by a pull (whenever possible – dynamometer).
10. Move the capacity of drain below an oil filter.

11. Through one of types of special keys they weaken the filter (companion sees an illustration). In the course of a reversion of the case of the filter be able to be damaged what has not special value in case of his unmistakable substitution (in the last case the old filter of a reversion only can perforate the great screwdriver – it is prepared to join the spilled oil). Manually finally result the filter of the block – remembers that in him some amount of oil who must let go out in the drain capacity keeps on remaining. One secure what the placing of fighter of rubber withdrew together with the filter if it is not present, separate it of the surface of the block of the motor.

12. Carefully rub with pure rags the surface of landing of the filter in the block. Again one secures that the old placing did not remain in the motor, in case of the use of necessity a scraper.

13. One secures that the new filter corresponds in the so great retired standard of the car. Polish the placing of fighter of rubber of the new filter with a fine layer of oil of pure reason (companion sees an illustration). Screw the new filter in the motor, observing the direction of the rotation specified by an arrow in his case. To avoid that the damage of the placing does not apply any key to the pressure of a filter of oil. After placing nestles the filter in the surface of the block they seize it in 3/4 turns.

14. Take all the instruments and the materials of bass of the car – try not to knock down the capacity of drain. Lower the car in the land.
15. Fill out the fresh oil in a mouth of reception of the motor – for aims of the reduction to the minimum of the use of losses a funnel. Wait for several minutes, having allowed when oil flowing down in the trundle bed, soon to check his level in the probe of measuring (to see the Check of levels of liquids (each one 400 km of a race or weekly)). If the level is above the lowest mark in a probe edge, the motor begins, having supplied the circulation of fresh oil.
16. Having allowed to the motor to work inside approximately a minute, again deaden it and at the same time launch the eyes below the car if the checking there is not any hole for a cork of drain and the filter of complete line. In case of the necessity they hold tight the component thing that allows a little holes.
17. After the fresh oil protsirkulirovat in the motor, there was a final stuffing of a new filter of oil. Now it is necessary to check again the level of oil and in case of the necessity still of adding a little of his quantity, having brought the level to the superior mark in a probe edge.
18. During several first travels after the modification of oil of reason they try it checks his level as very often as possible.
19. The fused carried out oil of the motor is not subject to the secondary use and it has to be handed at the special place of the acceptance. It does not establish the work of in the land in absolute or in the piping – they empty it in the hermetically shut container and in the first opportunity they hand.