Specifications
The recommended and liquid lubricants
|
|
The lubricants and the liquids recommended for the use of cars by the manufacturer of company in the moment of the editorial staff of the present manual are enumerated down. The most fresh information can be obtained in workshops of repairs of car of the enterprise of the company of Honda. |
| Characteristic |
Value |
Reason oil: | |
To type | Universal SG, SH or oils SJ in API |
Viscosity | They are specified in the card (to see an illustration I lower) |
Type of liquid of transmission for in | ATF Honda prize formula |
Type of liquid of transmission of CVT | ATF Honda CVT |
Type of oil of gear box of RKPP | MTF Honda |
Type of fluid of brake | POINT 3 |
Type of liquid of system of hydrofortification of a wheel | Amplifying hydraulic liquid of the direction of Honda |
Type of fuel | Gasoline without lead with number of octano more low than 87 |
Card of viscosity of oils of reason
Volumes of liquids of work, l *
| Characteristic |
Value |
Reason oil | |
Civic | |
Motor of D16Y5 | 3.3 |
Motor of D16Y7 | 3.6 |
Motor of D16Y8 | 3.3 |
It integrates | |
Motor of B18B1 | 3.8 |
B18C1 and motors B18C5 | 4.0 |
Transmission liquid for in (depleção and filling) | 2.7 |
Liquid of transmission of CVT (depleção and filling) | 3.9 |
RKPP | |
Civic | 1.8 |
It integrates | 2.2 |
Liquid cooling | |
Civic | 3.0 |
It integrates | |
Motor of B18B1 | 4.4 |
B18C1 and motors B18C5 | 4.7 |
* All the volumes only are specified approximately. In the agreement etiquettes happen with the level. |
Ignition system
| Characteristic |
Value |
Taken of spark | |
Civic | |
Motor of D16Y5 | |
To type | NGK ZFR4F-11 |
Slit of interelectrode, mm | 0.99÷1.09 |
D16Y7 and motors D16Y8 | |
To type | NGK ZFR5F-11 |
Slit of interelectrode, mm | 0.99÷1.09 |
It integrates | |
Usual | |
To type | NGK ZFR4F-11 |
Slit of interelectrode, mm | 0.99÷1.09 |
Platinum | |
To type | NGK PFR4G-13 |
Slit of interelectrode, mm | 1.19÷1.29 |
Resistance of wires of candle, Ohm | More loudly than 25.000 |
Ignition order | 1-3-4-2 |
Agreement of cylinders and direction of rotation of the distributor of ignition
System cooling
| Characteristic |
Value |
| Temperatures of operation of the thermostat, °C |
|
| Opening beginning |
79 |
| Full opening |
91 |
Size of a deflexão of driving of belts of auxiliary unities, mm
| Characteristic |
Value |
Bomb direction | |
New belt | 9.5÷12.7 |
The belt that was in the use | 12.7÷15.9 |
Creator
| Characteristic |
Value |
Models without to / in | |
New belt | 9.5÷12.7 |
The belt that was in the use | 6.4÷11.1 |
Models with to / in | |
New belt | 4.8÷7.9 |
The belt that was in the use | 9.5÷12.7 |
Brakes system
| Characteristic |
Value |
Least admissible thickness of bedcovers of friction of blocks of mechanisms of brake of disc, mm | 1.6 |
Least admissible thickness of bedcovers of friction of boots of mechanisms of brake of drum, mm | 2.4 |
Agreement of the brake of parking | 6÷10 of clicks of a catraca |
Turns waste time (inside a minute)
Characteristic | Value |
| Civic | |
Motor of D16Y5 | |
RKPP | 670 ± 50 |
IN and CVT | 700 ± 50 |
D16Y7 and motors D16Y8 | |
| The USA | |
RKPP | 670 ± 50 |
IN and CVT | 700 ± 50 |
Canada | 750 ± 50 |
It integrates | |
B18B1 and motors B18C1 | 750 ± 50 |
Motor of B18C5 | 800 ± 50 |
Parameters of the general agreements
| Characteristic |
Value |
Slits of Valvate (in the cold motor), mm | |
Civic | |
Entry valves | 0.178÷0.229 |
Final valves | 0.229÷0.279 |
It integrates | |
Motor of B18B1 | |
Entry valves | 0.076÷0.127 |
Final valves | 0.152÷0.203 |
B18C1 and motors B18C5 | |
Entry valves | 0.152÷0.178 |
Final valves | 0.178÷0.203 |
Efforts of corseting itself of screwed connections, Nanômetro
| Type of connection |
Value |
| Drain cork of in and CVT | 49 |
| Drain cork of RKPP | 39 |
| Gooey cork of RKPP | 45 |
| Fuel filter | |
| Hollow pin | 14.9 |
| Nut of a hollow pin | 22 |
| Taken of spark | 17.6 |
Nuts of fixation of wheels | 110 |
|
